|
| Z-Cylinder Combination of hydraulic adjustment cylinder and gas traction spring |
Z-Cylinder
No external compression force (load) required Not only gas spring components are used for this cylinder adjustment variation but additionally our gas spring technology. The Z-Cylinder is a combination of hydraulic adjustment cylinder and gas traction spring. The Z-Cylinder variation allows the system to be compressed without the need of external compression force (load). It can be installed in any position. Product features: - No external compression force required
- max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- Standard compression force: 100N
- several connecting parts available
- Special Z-Cylinder designs on request
|
|
stroke | cylinder tube length (EL2) | diameter piston rod/ cylinder
| model | max weight per cylinder | speed* | order number incl connecting parts | 150mm | 245 mm
(stroke + 96 mm) | 10/28 mm | 1 | 100 kg | fast | ZZ413150-A1ZW | 2 | 150 kg | normal | ZZ416150-A1ZW | 200mm | 295 mm
(stroke + 96 mm) | 10/28 mm | 1 | 100 kg | fast | ZZ413200-A1ZW | 2 | 150 kg | normal | ZZ416200-A1ZW | | 300mm | 395 mm
(stroke + 96 mm) | 10/28 mm | 1 | 100 kg | fast | ZZ413300-A1ZW | 2 | 150 kg | normal | ZZ416300-A1ZW | 400mm | 495 mm
(stroke + 96 mm) | 10/28 mm | 1 | 100 kg | fast | ZZ413400-A1ZW | 2 | 150 kg | normal | ZA413400-A1ZW |
*speed depends also on selected actuation
| Model:
The pump must be selected in correspondence with the adjustment cylinder model. - Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation:
The length is always calculated with retracted piston rod.
The complete length of the Z-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of connecting part
ELZ: length of cylinder side connecting part |
|
Z-Cylinder 