|
| E-Cylinder
|
E-Cylinder (not guided)
Additional guide required, small diameter By accessing components from the Bansbach gas spring production, a large variety of cylinders can be offered. The E-Cylinder requires an additional guide. The E-Cylinder alone is not designed to absorb side forces.
Product features: - max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- force per E-Cylinder required to compress: 50N
- several connecting parts
- special E-Cylinder designs on request
|
|
stroke | cylinder tube length(EL2) | model | diameter piston rod/ cylinder | max weight per cylinder | speed* | order number incl. connecting parts | 150mm | 190,5 mm
(stroke + 40,5 mm) | 1 | 10/15 mm | 100 kg | fast | ZE113150-EBEX | 2 | 10/18 mm | 150 kg | normal | ZE316150-EBEX | 200mm | 240,5 mm
(sroke + 40,5 mm) | 1 | 10/15 mm | 100 kg | fast | ZE113200-EBEX | 2 | 10/18 mm | 150 kg | normal | ZE316200-EBEX | | 300mm | 340,5 mm
(stroke + 40,5 mm) | 1 | 10/15 mm | 100 kg | fast | ZE113300-EBEX | 2 | 10/18 mm | 150 kg | normal | ZE316300-EBEX | 400mm | 440,5 mm
(stroke + 40,5 mm) | 1 | 10/15 mm | 100 kg | fast | ZE113400-EBEX | 2 | 10/18 mm | 150 kg | normal | ZE316400-EBEX |
* dependent also on selected actuation
|
Model:
The pump must be selected in correspondence with the adjustment cylinder model. - Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation: 
The length is always calculated with retracted piston rod.
The complete length of the E-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of piston rod side connecting part
ELZ: length of cylinder side connecting part |
|
E-Cylinder 