|
| A-Cylinder Further guiding of
the A-Cylinder is
not required |
A-Cylinder (guided cylinder)
Addition guide not required A wide variety of A-Cylinder variations are available out of the gas spring production, guaranteeing our usual high quality. The A-Cylinder can be mounted directly on moveable part of the application. Further guiding of the A-Cylinder is not needed. Product features: - max. weight 600 kg per system
- stroke length from 150 mm to 400 mm
- force per A-Cylinder required to compress: 50N
- several connecting parts
- special A-Cylinder designs on request
|
|
stroke | cylinder tube length (EL2) | diameter piston rod/ cylinder
| model | max weight per cylinder | speed* | order number incl connecting parts | 150mm | 315 mm
(stroke + 179 mm) | 22/28 mm | 1 | 100 kg | fast | ZA213150-ABAW | 2 | 150 kg | normal | ZA216150-ABAW | 200mm | 365 mm
(stroke + 179 mm) | 22/28 mm | 1 | 100 kg | fast | ZA213200-ABAW | 2 | 150 kg | normal | ZA216200-ABAW | | 300mm | 465 mm
(stroke + 179 mm) | 22/28 mm | 1 | 100 kg | fast | ZA213300-ABAW | 2 | 150 kg | normal | ZA216300-ABAW | 400mm | 565 mm
(stroke + 179 mm) | 22/28 mm | 1 | 100 kg | fast | ZA213400-ABAW | 2 | 150 kg | normal | ZA216400-ABAW |
* dependent also on selected actuation
|
Model:
The pump must be selected in correspondence with the adjustment cylinder model.. - Model 1: fast speed (6 - 8 mm per pump rotation), normal load up to 100 kg per Cylinder.
- Model 2: high load up to 150 kg per Cylinder, normal speed (4 - 5,3 mm per pump rotation).
Inserted length calculation:: 
The length is always calculated with retracted piston rod.
The complete length of the A-Cylinder is calculated as follows:
EL1 = EL2 + ELK + ELZ
EL2: length of retracted cylinder including piston rod (see table above)
ELK: length of connecting part
ELZ: length of cylinder side connecting part |
|
A-Cylinder 